TURNED & CHIP CARVED VIGILANT COW BUTTERPRINTca. 1870-1880s; lathe turned one piece print has bulbous turned knob-handle with carved cow in meadow scene with tree limb hanging over body of cow, cow depicted with...
[more like this]
RARE CHERRY PARROT ON STEM BUTTER PRINTCA. LATE19th century; later era shop crafted print that is two-part lathe turned, round hardwood print with fine thread screw mounted ball top peg handle, print face has lathe...
[more like this]
HEART PATTERN HANDLED BUTTER PRINT CA.20THcentury; following forms of early prints, this single piece butter print is lathe turned with turned knob handle, lathe turned rim banding with chip carved pie crimp border,...
[more like this]
LARGE LATHE TURNED BURLWOOD KITCHENBOWL CA.early 19th century; large treadle lathe turned bowl with gouge banded foot, bead incised rim band 1 1/4" from chamfer edge rim and interior and exterior incised scratch...
[more like this]
3 LATHE TURNED WOOD KITCHEN BOWLSca.19th century; turned maple flat footed combination dough/butter bowl with chamfer trimmed rim and exterior gouged flute band, 13"-14"d, 3 3/4"h, Condition: bottom thin has...
[more like this]
2 BURL WOOD KITCHEN BOWLSca. 18th-late19th century; earlier smaller size mixed use bowl, lathe turned from burled walnut wood, probably turned on early treadle lathe with flat bottom, round side, rounded rim and...
[more like this]
BURL WOOD LATHE TURNED BOWLca. 18th-19thcentury; unknown wood species burl bowl that is early treadle lathe turned with flat raised foot that has upper incised and bead band, 8 3/4"d, 3 1/4"h; Condition: excellent...
[more like this]
CARVED CENTRAL STAR FLOWER DESIGN HANDLEDBUTTER Pca. 1880-1900; initialed "H.C." lathe turned single piece fruitwood print with large round knob handle, lathe incised three-line banded edge and central layout line...
[more like this]
6 "BULLARD-TYPE" FACTORY MADE WOODENBUTTER MOLDSca. post 1866; all similar lathe turned three-part mold prints with plunger, lathe turned box molds with decorative accents and carved with plunger including:...
[more like this]
RACINE UNIVERSAL MOTOR CO. JEWELERSLATHE United States,20th CenturyRacine Universal Motor Co. Jewelers Lathe No. B5234 with polishing dremel bits....
[more like this]
VEGA LATHE MODEL 1553. ESTATE OF MARILYNWARE STRASBURG...Vega lathe model 1553. Estate of Marilyn Ware Strasburg, PA.
Condition:
All lots are sold "AS IS" The condition of lots can vary widely and are unlikely...
[more like this]
TWO AMERICAN TURNED WOOD VESSELS, DALENISH, AL STIRTone by Dale Nish (born 1932), lathe turned wormy ash vase, signed and illegibly dated "Dale L. Nish/1989(?)", marked "Ash", 14-3/8 in.; one by Al Stirt (born...
[more like this]
TWO RUDE OSOLNIK WEED POTS(New Mexico/Kentucky,1915-2001)
locust vessel, lathe turned, signed and dated "Locust/RO/'97", 6-1/2 x 4-1/2 in.; small vessel, lathe turned, signed and dated "Rude Osolnik/1991", 4-3/4 x 3-1/2...
[more like this]
FOUR RUDE OSOLNIK SMALL BOWLS(New Mexico/Kentucky,1915-2001)
Chinese Chestnut, lathe turned, signed and dated "Chinese Chestnut/Rude Osolnik/'96", 2 x 5-7/8 in.; Kingwood, lathe turned, signed and dated "kingwood/Rude Osolnik/'97",...
[more like this]
12pc Dendritic Talc Lathed MiniatureJars and Vases- some signed on base- largest 1.25''...
[more like this]
JON SAUER, AMERICAN , BOTTLE #91-185,STUDIO TURNED WOOD VESSEL / JAR WITH LID, 4 3/4"H X 2 3/4"DJon Sauer, American Bottle #91-185, studio turned wood vessel / jar with lid Cocobolo, Ebony, ____ and ____....
[more like this]
CRAFTSMAN MODEL 101.07301 METAL TURNINGLATHE, HAV LATHE, having 6" swing, 18" bed, two chucks, live center, gears (for threading), left and right tool holders, knurling tool, milling attachment, goose neck lamp...
[more like this]
LATHE 19TH CENTURY HEIGHT 16.5”. WIDTH32”. DEPTH 9.5”.LATHE, 19th Century, Made from multiple hardwoods with some applied whalebone components. Dimensions: Height 16.5". Width 32". Depth 9.5"....
[more like this]
LARGE TURNED WOOD KITCHEN BOWLca. mid-late19th century; early duplicator lathe turned maple bowl with 3/4" wide rim band, exterior with graduated step turned lines from being turned on early duplicator lathe and old...
[more like this]
OVERSIZED LATHE TURNED SERVING TRAYca.18th-19th century; lipped rim wooden serving tray turned on old treadle power lathe with incised and relief flute banding on tray bottom and added pumpkin orange old painted...
[more like this]
2 WOODEN KITCHEN BOWLSca. mid 19th century;both lathe turned maple bowls finished with red stain wash on exterior of bowl, both appear to be turned on early duplicator lathe with turning lines and smooth surface finish,...
[more like this]
STEVE CURRIE (B. 1954), STEG, 1987,BASSWOOD, DYE WAX, LEAD, AND METAL LATH, 39" H X 64" W X 13" DSteve Currie, (b. 1954) Steg, 1987, Basswood, dye wax, lead, and metal lath Basswood, dye wax, lead, and metal...
[more like this]
Pair of Moorish Lathe-Turned PolychromedDoor Panels, each framed and paneled with lathe-turned spindles in an interlocking grid pattern, h. 84", w. 20"....
[more like this]
An Indian Teak Footed Rice Measure Bowlcirca 1880 having straight sides tapering to the pedestal base; the exterior with lathe turned concentric rings. Height 8 1/2 x width 15 x depth 15 inches....
[more like this]
Maple Burl Lathe Turned Vessel by DennisElliott American 1995 a maple burl lathe turned vessel by Dennis Elliott. Before he became a turner Mr. Elliott was the drummer for the popular British rock and roll group...
[more like this]
Philip Moulthrop American, 20th century,lathe-turned spalted river birch bowl, artist's initials and signature, wood identification Betula nigra and "82.0001" on base, 6-3/4 x 11 in.,...
[more like this]
A Continental Lathe Carved Ivory Boxof circular form carved with radiating stylized petals and foliate roundels the base with an engraved guilloche pattern. Diameter 3 inches....
[more like this]
Lathe Engineer's Occupational ShavingMug Porcelain with polychrome painted engineer operating a lathe. Gilt name John H. Schenk with Engineer in lower left. 4'' in height. Condition: Ca 85% gilt remaining....
[more like this]
Philip Moulthrop American, 20th century,lathe-turned red leopard maple bowl, artist's initials and signature, wood identification Acer rubrum and "82.0001" on base, 8-1/2 x 8-1/2 in.,...
[more like this]
A French Lathe Turned Oak StaircaseNewel Post circa 1860 having carved multi-ring baluster turnings and topped with a flat top urn shape finial. This architectural element is designed to support the handrail...
[more like this]
A late 16th/early 17th Century colouredengraving - ''Map of the Shyre of Kent divided into five lathes therof'' - Map of Kent showing London part of Surrey and Sussex 7.75ins x 14.25ins (Anonymous - thought to...
[more like this]
An 18th Century coloured engraving -''A Map of the County of Kent'' divided into Lathes with view of Dover Castle and Towne to the lower right margin and the borders depicting armorials of the families of Kent...
[more like this]
Emanuel Bowen (fl. 1714 - died 1767)- Coloured engraving - ''An Accurate Map of the County of Kent divided into its Lathes'' 20.25ins x 27.5ins sold by J. Hinton at The Kings Arms in St. Pauls Churchyard London...
[more like this]
An English Brass and Steel Watchmaker'sLathe c. 1890 mahogany case with carrying handles interior having various fittings and tools height 10 1/2 in. width 19 in. depth 10 in....
[more like this]
Monumental Pair of Moorish Lathe-Turned,Framed and Paneled Polychromed Wall Panels, ca. 1900, each comprised of interlocking turned spindles within a framework panel, h. 137", w. 60", d. 4"...
[more like this]
A large African pestle and mortar thepestle rough carved with centre grip the mortar lathe turned and iron banded the inside rough carved. Pestle 59 cm mortar 26 cm dia. x 25 cm high....
[more like this]