AMERICAN FULL-BODIED ETHAN ALLEN HORSEWEATHERVANE 20th c., after L.W. Cushing & Sons of Waltham, Massachusetts, molded copper body with cast brass head, mounted on horizontal batten with pivot flange....
[more like this]
FULL BODY COPPER SULKY WEATHERVANE OF"AMERICAN GIRL" H...attributed to J.W. Fiske & Co., circa 1880, copper with molded zinc head, striding horse pulling a sulky and rider, separately cast and molded reigns and...
[more like this]
FINE COPPER STEEPLECHASE HORSE WEATHERVANE,MASSACHUSETTSMaker unknown. Originally found in the Newport, RI area.
31 in. x 37 in.
Note: A similar example of the above offered lot was sold at Sotheby's, NY in 1998...
[more like this]
MOLDED AND GILT COPPER PRANCING HORSEWEATHERVANE, A. L. JEWELL AND COMPANY (ACTIVE 1852-1865) WALTHAM, MAFitted with a cast zinc head with applied ears above a molded body and grooved tail.
26 x 28 1/4 in.,...
[more like this]
ANTIQUE BLACK HAWK RUNNING HORSE WEATHERVANE.Ca. 1900 molded copper 'Black Hawk' running horse weathervane, 21”H x 26”L....
[more like this]
A contemporary molded copper runninghorse weathervane with brass directionals, displayed on a steel mounting rod. Horse 17” x 30” x 47”H overall Condition: missing left ear CT Transfer Fee: $20...
[more like this]
BLACK HAWK RUNNING HORSE MOLDED COPPERWEATHERVANE, LAT...Black Hawk Running Horse Molded Copper Weathervane, late 19th Century, modeled with thick neck, backward ears, flowing mane and tail; Note: Black Hawk was...
[more like this]
A Molded and Gilt Copper and Cast-ZincHorse Weathervane
New England, Late 19th Century
on a later iron stand.
Height overall 17 x length 31 inches....
[more like this]
A Molded Copper Dexter Horse Weathervane
19thCentury
retains a verdigris patina.
Length 30 1/2 inches....
[more like this]
A Molded Copper and Cast Zinc RunningHorse Weathervane
20th Century
with two associated directionals.
Height of horse 19 1/2 x length 33 1/4 inches.
Property from the Estate of a Renowned Art Dealer, New York...
[more like this]
AN AMERICAN MOLDED ZINC HORSE WEATHERVANEAnAmerican molded zinc horse weathervane, 20th Century With full-bodied running horse on a rod 16" H x 24" W x 1.5" D Dimensions: 16" H x 24" W x 1.5" D...
[more like this]
AN AMERICAN MOLDED COPPER HORSE ANDBUGGY WEATHERVANEAn American molded copper horse and buggy weathervane, Second Half 20th Century With full-bodied running horse and buggy with rider on a rod 18" H x 31"...
[more like this]
RUNNING HORSE WEATHERVANE, AMERICAN,19TH C., MOLDED COPPER, HOLLOW, EXPECTED SURFACE WEAR INCLUDING VERDIGRIS, VISIBLE SOLDER LINES...Running horse weathervane, American, 19th C., molded copper, hollow, expected...
[more like this]
SULKY AND HORSE WEATHERVANE, MOLDED,FIGURAL COPPER WITH ACCENTS, ATTACHED TO CROSSBAR, IRON DISPLAY PIECES INCLUDED, WEAR CONSISTEN...Sulky and horse weathervane, molded, figural copper with accents, attached...
[more like this]
RUNNING HORSE WEATHERVANE, MOLDED COPPERHORSE, ABOVE BANDED SPHERES AND DIRECTIONALS, WEAR CONSISTENT WITH AGE INCLUDING DINGS, DEN...Running horse weathervane, molded copper horse, above banded spheres and directionals,...
[more like this]
RUNNING HORSE WEATHERVANE, AMERICAN,19TH C., IN THE MANNER OF A.S. JEWELL & CO. OF WALTHAM, MASSACHUSETTS, FLATTENED MOLDED BODY WI...Running horse weathervane, American, 19th C., in the manner of A.S. Jewell...
[more like this]
LARGE MOLDED COPPER STANDING HORSE WEATHERVANELargemolded copper standing horse weathervane, ca. 1900 , with cast zinc head, 27 1/2" h., 30" l. Provenance: A Long Island, New York collection.
Condition:
Several repairs...
[more like this]
MOLDED DEXTER HORSE AND JOCKEY COPPERWEATHERVANEMolded Dexter horse and jockey copper weathervane, ca. 1880 , possibly Cushing and White, Waltham, Massachusetts, both horse and figure with cast lead head, retaining...
[more like this]
HARRIS & CO., BOSTON, PRANCING HORSEWEATHERVANEHarris & Co., Boston, Massachusetts molded copper Hambletonian prancing horse weathervane, late 19th c. , with a cast zinc head, retaining an old verdigris surface,...
[more like this]
MOLDED COPPER JUMPING HORSE AND HOOPWEATHERVANEMolded copper jumping horse and hoop weathervane, 20th c., retaining an old gilt surface, mounted to a turned and painted post, overall height - 26 1/2" h., 21"...
[more like this]
A JONATHAN HOWARD AND CO. MOLDED COPPERWEATHERVANE, MID/LATE 19TH CENTURY; WEST BRIDGEWATER, MASSACHUSETTSA Jonathan Howard and Co. molded copper weathervane, Mid/late 19th century; West Bridgewater, Massachusetts...
[more like this]
LARGE PRANCING HORSE WEATHERVANE BYJEWELL Important Prancing Horse Weathervane, circa 1860, having molded and sheet copper body, on an iron support bar, simulating the ground. Beautiful original verdegris patina....
[more like this]
LARGE 'DEXTER' TROTTING HORSE WEATHERVANE,ATTRIBUTED TO L.W. CUSHING & SON Rare 42" Trotting Horse having a molded copper body, circa 1880, structurally original, with an evolved mustard yellow paint. The paint is...
[more like this]
ETHAN ALLEN RUNNING HORSE GILT WEATHERVANEFull bodied, molded copper, zinc head, circa 1880-1910, on mount, 18" x 33 1/2" x 4 1/2", repair to leg, some retouch to gilding....
[more like this]
Three American Cast and Molded MetalWeathervanes
20th Century
comprising a molded copper horse on a red directional, an arrow directional and an iron rooster.
Length of first mentioned 26 1/2 inches.
Property...
[more like this]
A Molded Copper and Zinc Horse and SulkyWeathervane
20th Century
Length 33 1/2 inches....
[more like this]
Rare large horse and sulky weathervaneof molded copper, circa 1890, with verdigris surface, possibly by J.W. Fiske, NY.
25"h x 36"l x 12"w (including base)
20"h x 34"l x 10.5"w (sulky only)
Condition: Traces of...
[more like this]
Molded copper running horse weathervane19th c. with a zinc head. 15"h.x31"l....
[more like this]
Molded copper trotting horse weathervanelate 19th century The full-bodied figure of a trotting horse with foreleg raised, retains boulle surface. L: 27 1/2 in. PROVENANCE: John Edward "Jack" Whistance,...
[more like this]
Copper molded running horse weathervane19th c. 18.5"h.x25"l....
[more like this]
Molded copper horse weathervane, runninghorse with cast zinc head, American, late 19th century, 22 x 32 in....
[more like this]
Molded copper weathervane, running horsewith articulated eyes, mane and tail, applied ears, with rod and directionals on later wooden block, American, probably early 20th century, 46-1/2 x 32-1/2 x 18 in. Old polished...
[more like this]
Horse With Two-Wheeled Sulky WeathervaneAmerican, second half 19th century, well-constructed horse and capped rider of molded copper sections assembled with solder, copper wire harness and sulky, surfaces primed...
[more like this]
Waltham Massachusetts prancing horseweathervane ca. 1865 by A.E. Jewell & Co. with zinc head molded copper body and sheet... ?...
[more like this]
Molded Copper Horse Form WeathervaneAmerican, mid 19th century, standing copper stallion, old painted surface, 30-1/2 in., 73 in. with metal stand...
[more like this]
Horse weathervane, molded copper andzinc, probably late 19th/early 20th century, 14 x 23-1/2 in., now mounted on tripod cast iron pedestal, 36 in. General surface corrosion, possible repairs to tail and legs,...
[more like this]
