CONTEMPORARY FULL BODY ROOSTER WEATHERVANEONdisplay stand ca. 20th century; sheet copper press molded and soldered hollow body rooster with mounted pressed sheet arching tail feathers, cut out cocks comb and waddle,...
[more like this]
RACEHORSE ETHAN ALLEN WEATHERVANE SIGNEDA. L. JEWELLThe large and nicely patinated example of molded copper with zinc head is stamped A. L. Jewell & Co Waltham, Massachusetts on one side. This model was marketed...
[more like this]
FULL BODY COPPER SULKY WEATHERVANE OF"AMERICAN GIRL" H...attributed to J.W. Fiske & Co., circa 1880, copper with molded zinc head, striding horse pulling a sulky and rider, separately cast and molded reigns and...
[more like this]
GILT COPPER GODDESS OF LIBERTY WEATHERVANE,ATTRIBUTED TO CUSHING AND WHITE, WALTHAM, MA (ACTIVE 1867-1933)Mounted on a standard with directionals. Figure 21 1/2 in. high; with standard 44 in. high.
Note: An identical...
[more like this]
FINE COPPER STEEPLECHASE HORSE WEATHERVANE,MASSACHUSETTSMaker unknown. Originally found in the Newport, RI area.
31 in. x 37 in.
Note: A similar example of the above offered lot was sold at Sotheby's, NY in 1998...
[more like this]
HORSE COPPER MOLDED WEATHERVANE, AFTERWHITING AND COMPANYRaised on a stand.
24 x 40 in.
Condition
Oxidized, dents and wear throughout with heavy soldering areas.Not withstanding this report or any discussion...
[more like this]
ANTIQUE BLACK HAWK RUNNING HORSE WEATHERVANE.Ca. 1900 molded copper 'Black Hawk' running horse weathervane, 21”H x 26”L....
[more like this]
MOLDED COPPER COD FISH WEATHERVANE.19thCentury Molded Copper Cod Fish Weathervane. Full-body dimensional figure with old gilt paint. 31"l. Condition: : Very good, minor dents and surface wear.
Condition:
Condition:...
[more like this]
RARE HOLLOW MOLDED COPPER GRASSHOPPERWEATHERVANE.Rare and Important Hollow Molded Copper Grasshopper Weathervane. Attributed to L.W. Cushing & Sons, Waltham, MA. Finely detailed body with strong verdigris surface....
[more like this]
EAGLE WEATHERVANE W/ EBONIZED BASEAmericanmolded gilt weathervane modeled as an eagle with outstretched wings poised on the top half of a ball, mounted to a round ebonized base. Ornament- 23 1/4" H x 41" W x 14 1/2"...
[more like this]
EAGLE WEATHERVANE W/BALL AND GREEN BASEAmericanmolded gilt copper weathervane of an eagle with outstretched wings poised on a ball. Mounted to later shaft and green painted wooden base. Figure makes a complete rotation...
[more like this]
VINTAGE MOLDED COPPER WHALE WEATHERVANEVintageMolded Copper Whale Weathervane, lacking directionals
Height 13 in. Length 36 in.
Condition:
Items may have wear and tear, imperfections or the effects of aging. Please...
[more like this]
BLACK HAWK RUNNING HORSE MOLDED COPPERWEATHERVANE, LAT...Black Hawk Running Horse Molded Copper Weathervane, late 19th Century, modeled with thick neck, backward ears, flowing mane and tail; Note: Black Hawk was...
[more like this]
LARGE AMERICAN FOLK ART COPPER LEAPINGDEER WEATHERVANE...late 19th century, cast zinc head with antlers, hollow molded copper body, in old surface with green patina, traces of paint, 36 x 43 in. including mounting...
[more like this]
AMERICAN FOLK ART MOLDED COPPER PIGFORM WEATHERVANElate 19th century, possibly L. W. Cushing, molded copper form with patinated and painted surface, curled tail and perked ears, 19-1/4 x 35 x 4-1/2 in., set...
[more like this]
AN AMERICAN MOLDED COPPER EAGLE WEATHERVANEAnAmerican molded copper eagle weathervane, Second Half 20th Century With full-bodied eagle and directional elements on a rod Weathervane: 28.5" H x 24" W x 23" D; Rod: 53.25"...
[more like this]
AN AMERICAN MOLDED COPPER PIG WEATHERVANEAnAmerican molded copper pig weathervane, 20th Century With impressed plaque: Made in USA With full-bodied pig and directional elements on a rod and iron stand Weathervane:...
[more like this]
RUNNING HORSE WEATHERVANE, AMERICAN,19TH C., MOLDED COPPER, HOLLOW, EXPECTED SURFACE WEAR INCLUDING VERDIGRIS, VISIBLE SOLDER LINES...Running horse weathervane, American, 19th C., molded copper, hollow, expected...
[more like this]
SULKY AND HORSE WEATHERVANE, MOLDED,FIGURAL COPPER WITH ACCENTS, ATTACHED TO CROSSBAR, IRON DISPLAY PIECES INCLUDED, WEAR CONSISTEN...Sulky and horse weathervane, molded, figural copper with accents, attached...
[more like this]
LEAPING STAG WEATHERVANE, AMERICAN,19TH C., MOLDED COPPER, WITH PATINA, CAST ANTLERS, EXPECTED SURFACE WEAR, REPAIRED BULLET HOLE,...Leaping stag weathervane, American, 19th C., molded copper, with patina,...
[more like this]
RUNNING HORSE WEATHERVANE, MOLDED COPPERHORSE, ABOVE BANDED SPHERES AND DIRECTIONALS, WEAR CONSISTENT WITH AGE INCLUDING DINGS, DEN...Running horse weathervane, molded copper horse, above banded spheres and directionals,...
[more like this]
RUNNING HORSE WEATHERVANE, AMERICAN,19TH C., IN THE MANNER OF A.S. JEWELL & CO. OF WALTHAM, MASSACHUSETTS, FLATTENED MOLDED BODY WI...Running horse weathervane, American, 19th C., in the manner of A.S. Jewell...
[more like this]
LARGE MOLDED COPPER STANDING HORSE WEATHERVANELargemolded copper standing horse weathervane, ca. 1900 , with cast zinc head, 27 1/2" h., 30" l. Provenance: A Long Island, New York collection.
Condition:
Several repairs...
[more like this]
MOLDED DEXTER HORSE AND JOCKEY COPPERWEATHERVANEMolded Dexter horse and jockey copper weathervane, ca. 1880 , possibly Cushing and White, Waltham, Massachusetts, both horse and figure with cast lead head, retaining...
[more like this]
Molded copper whale weathervane, 38"lx 14"h overall...
[more like this]
EXCEPTIONAL LARGE 19TH C. EAGLE WEATHERVANE.Ca. 1880's American eagle molded and gilt metal weathervane with a zinc tipped arrow, on a custom iron stand, Overall 35”H x 36”W x 37”L....
[more like this]
VINTAGE BUTTERFLY WEATHERVANE. A moldedand gilt sheet metal weathervane of a butterfly, attributed to Fiske, 21.5”H x 27”L, on a custom made stand, 23.5”H overall. Provenance: Purchased at the NY Winter Antiques...
[more like this]
AN AMERICAN MOLDED COPPER PIG WEATHERVANEAnAmerican molded copper pig weathervane, Early/mid-20th century; United States Appears unmarked With wind kinetic directionals and globe beneath the pig ornament; all mounted...
[more like this]
A JONATHAN HOWARD AND CO. MOLDED COPPERWEATHERVANE, MID/LATE 19TH CENTURY; WEST BRIDGEWATER, MASSACHUSETTSA Jonathan Howard and Co. molded copper weathervane, Mid/late 19th century; West Bridgewater, Massachusetts...
[more like this]
GILT METAL MOLDED COW WEATHERVANE, AMERICAN,LATE 19TH CENTURY 18 X 27 X 5 IN. (45.7 X 68.6 X 12.7 CM.), LENGTH OF BASE: 28 IN. (71.1 CM.) LATE 19TH CENTURY, Dimensions: 18 x 27 x 5 in. (45.7 x 68.6 x 12.7 cm.), Length...
[more like this]
FULL BODY COW WEATHERVANE American MoldedCopper Weathervane, surface with verdigris patina, on custom metal stand, 19 1/4" high, 22 1/2" wide, on 6" deep stand. Weathered surface.
Reference: "Gallery of American...
[more like this]
LARGE PRANCING HORSE WEATHERVANE BYJEWELL Important Prancing Horse Weathervane, circa 1860, having molded and sheet copper body, on an iron support bar, simulating the ground. Beautiful original verdegris patina....
[more like this]
FULL-BODIED 'JERSEY COW' WEATHERVANEATTRIBUTED TO L.W. CUSHING & SON Full Body Molded Copper with cast iron exceptionally detailed head, circa 1880. The 'Historic Surface' showing the sum of the original sizing,...
[more like this]
LARGE 'DEXTER' TROTTING HORSE WEATHERVANE,ATTRIBUTED TO L.W. CUSHING & SON Rare 42" Trotting Horse having a molded copper body, circa 1880, structurally original, with an evolved mustard yellow paint. The paint is...
[more like this]
Three American Cast and Molded MetalWeathervanes
20th Century
comprising a molded copper horse on a red directional, an arrow directional and an iron rooster.
Length of first mentioned 26 1/2 inches.
Property...
[more like this]
A Molded Copper Seagull-Form Weathervaneon Stand
American, 19th Century
Height on stand 67 inches; height of weathervane 26 1/2 x width 18 1/2 x 14 1/2 inches....
[more like this]
