A few examples of appraisal values for
CAVALRY SABER

• CAVALRY SABER. American
  CAVALRY SABER. American ca.1810. Dragoon saber with blueing and gilt engraved designs on the blade. Steel guard and leather wrapped handle. Marked ''A. W. Spies''. Wear. 37''l.
• AMERICAN CAVALRY SABER AND
  AMERICAN CAVALRY SABER AND SCABBARDAmerican Cavalry Saber and Scabbard , early 19th c., leather grip (lacks wire), iron scabbard, blade l. 32 in., presented in a shadowbox frame, 15 1/2 in. x 43 in
• Civil War era Calvary saber 19th c.
  Civil War era Calvary saber 19th c. together with two epees. ?
• Civil War light cavalry saber,
  Civil War light cavalry saber, leather grip, brass guard, blade with fullers, ricasso marked "AM
• US 1860 LIGHT CAVALRY SABER REPLICA
  US 1860 LIGHT CAVALRY SABER REPLICA W/ SCABBARD A nicely made replica of the Model 1860 Light Cavalry Saber used by Union forces during the Civil War. The sword features a 36" curved blade mounted to a bronze wrap-around hand-guard hilt and wire-wrapped leather grip. The sword has only one marking of a Knight's Helmet on the right hand side just above the hilt. The scabbard appears as if it could be a genuine Civil-War era piece, however, as it has the distinctive solder line along the blade edge. The sword is in overall good condition with some minor damage to the leather grip and light rust spots near the base, the scabbard has surface rust throughout.
• Civil War Enlisted Cavalry
  Civil War Enlisted Cavalry Saber, third quarter 19th century, of brass, spiral-carved hardwood and steel, the saber without a scabbard, l. 41\".
• US Cavalry Saber American, 19th
  US Cavalry Saber American, 19th century, War of 1812 era, guard with Greek armor in high relief, quillon with spread eagle and shield in relief, ribbed bone grip, pommel with eagle head and feathered neck, blade with bluing and engraving with gilt highlights, blade 29-3/4 in., total length 35 in.,
• Officer's Cavalry Saber American,
  Officer's Cavalry Saber American, early 19th century, stirrup-type grip with pillow pommel, incised bone handle, 33-1/4 in., brass-mounted leather scabbard,
• Model 1840 U.S. Cavalry Saber Civil
  Model 1840 U.S. Cavalry Saber Civil War era, openwork brass guard, blade marked at rocasso "Sheble & Fisher" over "PH LAD", 41 in. excluding scabbard,
• M1860 LIGHT CAVALRY SABER, CIVIL
  M1860 LIGHT CAVALRY SABER, CIVIL WARLight cavalry saber, unmarked blade. Believed to be made by Henry Sauerbier of Newark, N.J. (many of his swords were unsigned). Measures 43" overall in scabbard. See images. Some leather wear on grip. Fine blade edge, with one single edge bite. Gold painted scabbard. This item can be shipped in-house.
• Brass-Mounted Cavalry Saber
  Brass-Mounted Cavalry Saber Continental, late 18th/early 19th century, stirrup-type guard, domed and reeded pommel, checkered wooden grip, blade with gilt highlights and engraving with flowers, drums and swags, 38-1/2 in. excluding brass scabbard,
• CIVIL WAR MODEL 1860 U. S.
  CIVIL WAR MODEL 1860 U. S. CAVALRY SABER With 34-1/2 in. blade, the ricasso marked US with inspector's initials JCW and 1865 on the right side of the blade; the wooden grip with remnants of leather underneath the brass wire; knuckle bow numbered "100" while the pommel is stamped "VII 91 JH," lacking scabbard.
• 19th century U.S. cavalry saber,
  19th century U.S. cavalry saber, Mdl. 1864, brass guard, 38 in. overall, with leather McClellan type saddlebags with U.S. military marks and brass mounts. Blade in excellent condition, scabbard with minor dents and repaint, grip lacking wire and cover; saddlebags with extensive mildew and stiff areas. Perry Estate, Nyack, New York.
• ANTIQUE CAVALRY SABERDESCRIPTION:
  ANTIQUE CAVALRY SABERDESCRIPTION: An antique cavalry saber/sword with sheath. CIRCA: 19th Cent. ORIGIN: Continental DIMENSIONS: L: 38.5" CONDITION: Great condition. See lot description for details on item condition. More detailed condition requests can be obtained via email (info@akibaantiques.com) or SMS (305) 333-4134. Any condition statement given, as a courtesy to a client, is only an opinion and should not be treated as a statement of fact. Akiba Antiques shall have no responsibility for any error or omission.
• CIVIL WAR LIGHT CAVALRY SABER.
  CIVIL WAR LIGHT CAVALRY SABER. European mid 19th century. Brass guard and wire wrapped leather grip. 38 1/2''l. Purportedly this sword was an import for the Confederacy and a faint mark on the blade is supposed to be for the 1st Virginia Cavalry.
• CAVALARY SABER. Model 1860.
  CAVALARY SABER. Model 1860. Both sides of blade are corroded near the handle. No markings are visible on sides. A numeral ''2'' is visible on the top of the blade about an inch from the hilt. No wire and the leather wrap is not original. Possibly an European import of the period.
• U.S. Cavalry Officer's Model 1872
  U.S. Cavalry Officer's Model 1872 Saber 34'' blade with etched panels of military motifs. In a panel near the ricasso is etched in four lines Springfield Armory Springfield Mass. U.S.A. This style of marking was used circa 1892-1900. Shagren and gilt brass wire wrapped handle. Metal scabbard. Condition: Sword is excellent. The scabbard has a brown patina speckled with some nickel finish.
• Early 19th century U.S. cavalry
  Early 19th century U.S. cavalry saber, eagle head pommel, ivory grip, blade with 14 in. blued panel with ornate gilt decoration, 28 in. blade, 34-1/2 in. overall, with brass mounted leather scabbard. Blade with scattered light rust, retains most of original bluing, guard and pommel retain most of their original gilding, scabbard with minor dents and abrasions.
• Model 1840 US Cavalry Saber
  Model 1840 US Cavalry Saber unmarked blade, openwork guard, original grip and wire, mellow old patinated surface, 33 in. blade; metal scabbard, 40-3/4 in. total length,
• BRITISH CAVALRY SABER. DATED
  BRITISH CAVALRY SABER. DATED 1859. STEEL BLADEwith a brass hand guard and hilt and leather wrapped and brass handle. 41 1/2" overall 35 1/2" blade. Good condition.
• Model 1840 US Cavalry Saber
  Model 1840 US Cavalry Saber 33-3/4 in. blade, one side marked "US J.M. 1864", other side marked "F. MF. RS&Silver, Trenton, NJ.", probably original grip and wire, with scabbard, total length 42 in.,
• Two Civil War-Era Cavalry Sabers
  Two Civil War-Era Cavalry Sabers American, 19th century, one with 35 in. blade marked on one side \"US 1864\", other side marked \"Roby/W. Chelmsford/Mass\", brass guard, with scabbard, wooden grip with loss
• MODEL 1860 CAVALRY SABER 34-3/4 in.
  MODEL 1860 CAVALRY SABER 34-3/4 in. blade, the ricasso stamped U.S / J.M /186(2) on the right and EMERSON & SILVER / TRENTON, N.J. on the left, brass guard and pommel, exposed wooden grip; iron scabbard with two suspension rings.
• UNMARKED MODEL 1840 CAVALRY SABER
  UNMARKED MODEL 1840 CAVALRY SABER Mid-19th century, 35 in. curved blade; brass guard; wooden grip wrapped in old black tape; the iron scabbard with two suspension rings.
• TWO GERMAN CAVALRY SABERS A saber
  TWO GERMAN CAVALRY SABERS A saber with "GL" engraved on the langet, wooden grip, and a steel scabbard; and a saber with some grip damage, and a steel scabbard.
• Model 1860 Cavalry Saber by Roby
  Model 1860 Cavalry Saber by Roby 34.5" blade. Marked at the ricasso C. Roby;?reverse dated 1865.? Leather and brass wire wrapped handle.? Brass pommel and knuckle bow.? Metal scabbard. Condition: Excellent.
• Continental Cavalry Saber first
  Continental Cavalry Saber first quarter 19th century, probably French, partial basket stirrup type brass guard, 32-1/4 in. blade,
• MODEL 1860 U.S. LIGHT CAVALRY SABER
  MODEL 1860 U.S. LIGHT CAVALRY SABER The ricasso marked EMERSON & SILVER / TRENTON / N.J; 34-3/4 in. blade; brass guard, knuckle bow and pommel; the wooden grip wrapped with brass wire. LLA works in partnership with ARTA to fulfill shipments of most of the items we sell; weaponry is not included. Alternative shipping vendors are available. Please find a courtesy listing of local options on our Support Page.
• Cavalry Officer's saber Model
  Cavalry Officer's saber Model 1860 .35'' blade length brass pommel and knuckle bow. Leather and brass wire wrapped handle. Marked on the flat at ricasso Mansfield and Lamb and dated 1865. Metal scabbard. A popular model because of Indian Wars issue. Condition: Blade is in almost mint condition with very sharp crisp markings. Blade still shows the original polished lines. Scabbard is excellent.
• FRENCH-MADE CAVALRY OFFICER'S SABER
  FRENCH-MADE CAVALRY OFFICER'S SABER FranceBrass hilt with two branches and foliate designs, bone grip, steel blade, and a steel scabbard with two carrying rings.
• Model 1840 US Cavalry Saber
  Model 1840 US Cavalry Saber unmarked blade, openwork brass guard, original grip and wire, 32-3/4 in. blade; metal scabbard, 40-1/4 in. total length,
• MODEL 1860 U.S. CAVALRY SABER
  MODEL 1860 U.S. CAVALRY SABER 34-1/2 in. blade, the ricasso stamped U.S / ADK / 1863 on the right and having an illegible maker's mark obscured by corrosion on the left; lacking scabbard.
• US Model 1840 Cavalry Saber
  US Model 1840 Cavalry Saber 35-1/2 in. blade marked "Horstmann's Phila", with scabbard, total length 42-1/2 in.,
• CIVIL WAR ERA CAVALRY SABER.
  CIVIL WAR ERA CAVALRY SABER. American mid 19th century. Model 1840 with blade marked ''Tiffany & Co. New York'' and ''PDL'' (supplier of Soligen blade). Iron guard worn leather grip. Iron scabbard. 43''l.
• SABER. Probably American 1st
  SABER. Probably American 1st quarter-19th century. Officer's sword with brass eagle head guard and bone grip. Leather scabbard with German silver fittings. 34 1/2''l. overall.
• ANTIQUE EUROPEAN CAVALRY
  ANTIQUE EUROPEAN CAVALRY SABERPossibly French mid-1800s saber or sword, with symbols engraved on either side of blade. Measures about 39-1/4" long in scabbard. Horn badge missing on one side of guard. Grip has some wire loss. Overall very good. shipping info This item can be shipped in-house.