A few examples of appraisal values for
DENT CLOCK

• E. DENT & CO. ENGLISH CLOCKE.
  E. DENT & CO. ENGLISH CLOCKE. Dent & Co. mantel clock, ebonized obelisk form case with inlaid brass ornamentation; circular enameled dial with ovolo and beaded surround, applied bronze swag and stylized acanthus and paw feet. Time and strike with silent option. Retains key. 27"H x 19"W x 9"D. English, late 19th to early 20th century. Condition: 4" crack to top of case, scattered light abrasions and wear to case, light scratching and wear to dial, one 3" section of brass inlay missing. Works not tested or guaranteed.
• A gilt brass cased carriage clock
  A gilt brass cased carriage clock with repeat mechanism and alarm, the white enamel dial signed Dent, 33 Cockspur St, 15.5cm high
• A German architectural ebonised
  A German architectural ebonised bracket clock, late 19th c, with enamel chapter ring and turned gallery around 'tiled' pediment, brass ting-tang movement, pendulum, 52cm h More Information Good clean condition
• A brass table clock in the form
  A brass table clock in the form of an oscillating bird in a gilded cage the time indicated on a central flattened sphere ht. 14 cm.
• A ca. 1800-20 English tall clock
  A ca. 1800-20 English tall clock with broken arch crest and brass eagle finial, with a signed painted iron dial and brass works, the case has a tombstone door on a bracket base, with two weights, pendulum and key. 85”H x 19”W x 9.5”D Condition: case structurally sound, some blemishes commensurate with age, unknown working condition, family states clock was working a few years ago CT Transfer Fee $30
• A reproduction Austrian brass
  A reproduction Austrian brass skeleton clock, late 20th c, with enamel chapter ring, subsidiary dials and lunar work, with fusee movement, turned pillars and trunnions, pendulum, 36cm h, on wood base beneath glass dome More Information Lunar dial with minor chip, otherwise good clean condition
• A painted cast iron clock in the
  A painted cast iron clock in the form of a 19th c. gentleman holding the enamelled dial and with oscillating eyes. Ht. 39 cm.
• A brass framed ''Skeleton'' clock
  A brass framed ''Skeleton'' clock the 6.25ins diameter pierced and silvered chapter ring with Roman numerals to the twin brass framed steeple pattern framework with single train movement and passing strike 13ins high with silvered script banner to front worded ''Le Temps A Pris Un Corps Et Marche sous Nos Yeux'' mounted on ebonised plinth and with oval glass dome (dome cracked)
• A porcelain mounted easel clock
  A porcelain mounted easel clock of circular form with flower encrusted frame and engraved steel dial 17cm (7") diameter
• German carved wooden figural clock;
  German carved wooden figural clock; Joh Jac Schmidt mfg. table clock, carved gilt classical female and eagle forms flank circular mechanism mounted on ram's head pedestal table, painted porcelain face. All on ebonized base with glass dome. Top of dome 23"H. Clock 18"H. x 11"W. Restoration to figures and case.
• ELMER O. STENNES GRANDMOTHER
  ELMER O. STENNES GRANDMOTHER CLOCK Mid-20th c. Dwarf Chiming Clock, by cabinetmaker Elmer Stennes (Weymouth, MA), having a Chippendale style figured maple case with fretwork top and brass finials, 8-day time, strike and Westminster chime movement (with pendulum and key), with floral painted white enamel face signed "Elmer O. Stennis, Weymouth, Mass", hinged waist door flanked by reeded quarter columns, set on a bracket base, 61" high, 14" x 8".
• ATTR. STENNES DWARF CLOCKVintage
  ATTR. STENNES DWARF CLOCKVintage dwarf tall clock in cherry stained birch with 6 inch floral painted dial. Has 3 winding points for time, one hour strike, and quarter hour chime. Comes with pendulum. 59 inches high x 12 in wide. Unsigned, door locked, possibly by/after Elmer Stennes.
• THE DUKE CLOCK VINTAGE SESSIONS
  THE DUKE CLOCK VINTAGE SESSIONS ELECTRIC CLOCKCirca 1940. The reverse with applied manufacturers metal tag and an Abercrombie & Fitch retail label. The carved walnut dog’s head with inset eyes that rotate around two dials, one hourly, the other indicating minutes. Height 7 in. Width 5 in. Depthh 4 in. (Cond: loss to both ears, one more than the other, nice color)
• A DENT CONGREVE CLOCKA Dent
  A DENT CONGREVE CLOCKA Dent Congreve Clock, Circa 1970s With Dent plaque; Serial no. 109 / Andrew Fell / DEL. 1973 The congreve clock with three silvered dials, black Arabic numerals, a gilt-brass fuse movement, and rotating cylinder seconds gate, raised on a wood-over-green marble base with acrylic dome cover Overall: 18.75" H x 19.25" W x 14.5" D Dimensions: Overall: 18.75" H x 19.25" W x 14.5" D
• STENNES DWARF TALL CLOCKVintage
  STENNES DWARF TALL CLOCKVintage dwarf tall clock in cherry stained birch with 6 inch floral painted dial. Has 3 winding points for time, one hour strike, and quarter hour chime. Comes with pendulum. 59 inches high x 12 in wide. Not signed but guaranteed to be an original Elmer Stennes of Weymouth MA clock (infamous for having been sentenced to prison for killing his wife and later being murdered himself).
• A Louis XVI-Style Brass and
  A Louis XVI-Style Brass and Champlevé Enamel Clock domed top with sphinx finial dial with inset porcelain numerals striking gong movement with mercury pendulum height 21 1/2 in. diameter 10 in.
• CUSTOM-MADE GRANDMOTHER CLOCKIn
  CUSTOM-MADE GRANDMOTHER CLOCKIn mahogany and burled walnut veneers. Bonnet top with three brass finials. Hand-painted portrait of a pheasant in dome section. Scrolled bracket base. Height 60.''
• A 19th Century brass framed
  A 19th Century brass framed ''Skeleton'' clock the 6ins pierced and star shaped silvered chapter ring with Roman numerals to the twin brass framed fusee single train movement with passing strike bell 13.25ins high mounted on oval marble plinth and on ebonised oval base and with glass dome for same
• Large Edwardian Ormolu Mounted
  Large Edwardian Ormolu Mounted Ebonized Musical Bracket Clock, 19th/early 20th century the 8 inch gilt dial with silvered chapter and subsidiary rings, fronting a triple fusée quarter chiming movement with foliate engraved backplate playing Whittington or Westminster (Cambridge) chimes on a nest of 8 bells, and striking the hours on a further bell or on a gong 29.5 x 17.75 x 11 in — 74.9 x 45.1 x 27.9 cm
• A Brass Skeleton Clock having
  A Brass Skeleton Clock having twin pendulums before the enameled dial with Roman numerals with fusee movement set on a circular wood base. Height 17 1/2 x diameter 8 1/2 inches.
• An antique Pennsylvania walnut
  An antique Pennsylvania walnut Grandfather clock, a removable bonnet top with a swan's neck crest and carved rosettes, a dental molded case and shell carved door flanked by reeded quarter columns, the base has a tombstone panel flanked by fluted quarter columns. Brass works, a floral painted iron dial, two weights and pendulum. 87"H x (bonnet 18"W x 11.25"D) Condition: presently not working, no center finial, missing door escutcheon, old refinish, blemishes and shrinkage cracks throughout CT Transfer Fee $40
• Late 19th C. Eastlake architectural
  Late 19th C. Eastlake architectural clock oak case with carved laurel wreath scrolls and leaves time strike white face with Roman numerals and two winding holes brass egg dart dial border accompanying winding mechanism and pendulum French Medaille de Bronze works mirrored reverse panel with damage to righthand side checking scratches minor damages expected surface wear 22 1/2'' h. x 25 1/2'' w. x 16 1/2'' d. [NO SHIPPING AVAILABLE FOR THIS ITEM - SUCCESSFUL BIDDER MUST BRING HELP WHEN PICKING UP ITEM]
• An Assembled French Gilt Bronze and
  An Assembled French Gilt Bronze and Porcelain Mounted Clock Garniture the clock having a circular segmented enameled dial with Roman numerals flanked by putto masks and bellflower garlands each four-light candelabrum mounted with a seated musical putto and ram masks having Japy Freres time and strike movement. Height of candelabra 17 3/8 inches.
• EMPIRE-STYLE FIGURAL WALL
  EMPIRE-STYLE FIGURAL WALL CLOCKEmpire-Style Figural Wall Clock , 20th c., flanked by winged female terms, h. 33 in., w. 20 in., d. 4 in Provenance: Estate of Arley D. Cathey II, El Dorado, AR, sold to benefit the University of Chicago.
• An Unusual Automaton Novelty
  An Unusual Automaton Novelty Clock The small metal birdcage is in an oxidized finish. It contains a feathered bird and a pillar at the center with a ball at the top and an ivory color band around the middle with numerals and marks. A red pointer circles around to indicate the time. The cage is suspended from a hoop stand with a tiny angel at the top holding the ring inset in a cast glass base with a slightly pink tint. Overall it measures apprx. 8-1/2"H. So far the bird does not chirp.
• The Calendar Clock - A modern brass
  The Calendar Clock - A modern brass framed table clock the silvered upper dials depicting months of the year and signs of the Zodiac the lacquered brass framed movement with silvered twin scale showing hours and minutes on a central girdle supported by plain turned pillars 7.5ins diameter x 7ins high mounted on turned walnut base complete with cylindrical glass dome for same (No. 9 of edition limited to 500)
• German metal key wind clock;
  German metal key wind clock; ebonized circular body with applied classical ornamentation, patinated dial with Roman numerals. 16"H. Good condition, surface wear.
• An English Gilt Metal Mounted
  An English Gilt Metal Mounted Walnut and Brass Bracket Clock John Taylor London having a spherical finial over the sarcophagus top with urn form finials at each corner above the rectangular case set with an arched glazed door Strike-Silent dial set in the arch the clock dial with Roman hours and Arabic minutes flanked by maiden surmounts over foliate decoration set on a conforming stepped plinth raised on winged paw feet having an eight-day three-train fusee movement chiming quarters verge escapement and fully engraved backplate. Height 21 x width 11 1/4 x depth 7 3/4 inches.
• A French ebonised portico clock,
  A French ebonised portico clock, circa 1870, the 10cm white enamelled dial with black Roman numerals, twin winding holes, striking on a bell, gilt brass scroll and lozenge bezel, the case inlaid with shaped cresting brass capped twisted pillars, rectangular base, stained with shells and scrolls, 53cm high
• *A Continental Cast Metal and
  *A Continental Cast Metal and Enameled Figural Desk Clock in the form of two cherubs supporting the circular enameled dial with Roman numerals. Height 7 1/4 inches.
• A small brass skeleton clock,
  A small brass skeleton clock, late 19th Century, with an enamelled chapter ring, under a glass dome, 17.75cm high
• A brass framed ''Skeleton'' clock
  A brass framed ''Skeleton'' clock the 4.75ins diameter silvered chapter ring with Roman numerals to the eight day fusee movement with passing striking on a bell 14.75ins high mounted on mahogany oval base with bun feet with glass dome and white marble oval stand
• A plated mantel clock the dial
  A plated mantel clock the dial beneath a pitched pediment with hammered finish on four barleytwist columns circa 1930 approx. 24cm wide.
• A German Porcelain Figural Clock
  A German Porcelain Figural Clock circa 1875 having a putto above the circular dial with Roman hours and Arabic minutes surrounded by applied floral decoration and flanked by maidens holding baskets and grape clusters raised on a quadripartite base having Lenzkirch time and strike movement. Height 19 inches.
• An Edwardian eight-day mantel clock
  An Edwardian eight-day mantel clock in an arch top inlaid case with handles to the sides fitted a brass dial with decorative spandrels and silvered chapter ring the movement striking on a gong the back plate inscribed W and H Sch 36cm (14.5") high
• An English Gothic Revival Brass
  An English Gothic Revival Brass Musical Skeleton Clock Third Quarter 19th Century with a key winding musical quarter chiming mechanism. Clock, height 19 1/2 inches. Property from the Estate of Leslie Turchin, Fort Lauderdale, Florida