A few examples of appraisal values for
DRAFTING TABLE

• DRAFTING TABLEDrafting table with
  DRAFTING TABLEDrafting table with clamp on lamp, includes a drafters triangle and a Dietzgen Excello T-square; measures approximately 39-1/4" high and 42-3/16 "wide and 31" in depth.
• CONTEMPORARY DRAFTING TABLE
  CONTEMPORARY DRAFTING TABLE Contemporary drafting table, 30"h x 35.5"w x 24"d
• Drafting table. Top 31'' x 23''.
  Drafting table. Top 31'' x 23''.
• OAK DRAFTING TABLEOak framed
  OAK DRAFTING TABLEOak framed drafting table has an adjustable drawing surface with one large drawer and one smaller drawer with a sliding organizer and a shelf to the bottom; measure approximately 37-1/2" high (drawing surface flat), 60" wide and 38-1/2" in depth.
• Portable drafting table. Top 26'' x
  Portable drafting table. Top 26'' x 20 1/2''.
• VINTAGE WOOD DRAFTING TABLE, THE
  VINTAGE WOOD DRAFTING TABLE, THE RECTANGULAR PLYWOVINTAGE WOOD DRAFTING TABLE, the rectangular plywood and wood slat top is height adjustable and centered over wood trestle base with undertier, 34.25"H (lowest setting) x 23.75"W x 48"L.
• DRAFTING TABLE. Oak with adjustable
  DRAFTING TABLE. Oak with adjustable top and height driven by cast iron mechanisms. 32 3/4'' h. 60 1/4'' w. 32'' d.
• Industrial Drafting Table. Black
  Industrial Drafting Table. Black cone base on metal frame. Wood top. Dimensions: H: 28.5 inches: W: 36 inches: D: 24 inches --- Condition: Shows use. Some wear and stains.
• METAMORPHIC COUNTERBALANCE DRAFTING
  METAMORPHIC COUNTERBALANCE DRAFTING TABLE: Wooden drafting table, having a repainted black with remnants of green, metal frame. Attached iron weight. Locking pedal at lower right. Metal pen/pencil holder at drafting surface. Table flat Approx. 42.75'' h x 35.5'' l x 27.75'' w. Upright Approx. 59.25'' h. CONDITION: Some loss of paint, wear consistent with age and use.
• An American Pine Drafting Table
  An American Pine Drafting Table having a rectangular partial tilt-top with a tubular paper stop the base set with a series of paneled doors and a single drawer together with an associated stool. Height 36 3/4 x width 38 1/4 x depth 28 inches.
• A Directoire Mahogany and Leather
  A Directoire Mahogany and Leather Inset Drafting Table having a rectangular top over the plain brass inlaid frieze set with a single drawer and two side slides raised on square tapering legs ending in brass caps. Height 29 x width 33 1/4 x depth 19 1/2 inches (closed).
• H.M.N. DANISH TEAK AND CHROME
  H.M.N. DANISH TEAK AND CHROME ADJUSTABLE DRAFTING TABLE, H: 35 7/8 IN. (91.12 CM.)H.M.N. Danish Teak and Chrome Adjustable Drafting Table,, Dimensions: H: 35 7/8 in. (91.12 cm.)
• Wendy Evans Joseph. Drafting table.
  Wendy Evans Joseph. Drafting table. c. 1995, laminated birch, powder-coated steel, chrome-plated steel, wire. 37¾ h × 59¾ w × 30 d in. result: $1,188. estimate: $1,000–1,500. Table features top with adjustable height and degree of tilt, with a 36" Ez-Grip parallel straightedge.
• REGENCY BRASS-MOUNTED MAHOGANY
  REGENCY BRASS-MOUNTED MAHOGANY DRAFTING TABLE The hinged adjustable top with ratchet support and two candle slides on trestle supports and down-swept legs ending in brass beaded casters. 27 x 40 1/4 x 25 1/2 in. Property from a Private Collector.
• FRENCH PINE ADJUSTABLE DRAFTING
  FRENCH PINE ADJUSTABLE DRAFTING TABLE, C. 1900 French, circa 1900. Pine drafting table, having an adjustable workspace, on a trestle base. Unmarked. Approx. h. 36.75", w. 39", d. 25.75".
• FURNITURE DESIGNER RAY SOBOTA'S
  FURNITURE DESIGNER RAY SOBOTA'S DRAFTING TABLE: JG Alexander cast iron base table three drawers under the tilt top. The table top is 44'' x 34''. Provenance: The estate of Ray Sobota.
• HAMILTON DRAFTING TABLE: Hamilton
  HAMILTON DRAFTING TABLE: Hamilton Mfg. Co. Cast iron and wood drafting table with removable top that has a metal lower edge. Circa 1920's. Metal tag at stretcher. Approx. 32.5'' h x 32'' l x 26'' w. CONDITION: Scattered stains and pin holes consistent with age and use.
• Early 20th century adjustable
  Early 20th century adjustable drafting table up to 48 inches high. Iron base. Dimensions: H: 36 inches: W: 23.5 inches: D: 24 inches --- Condition: Very Good Used Condition.
• TILT-TOP ROTATING DRAFTING TABLE
  TILT-TOP ROTATING DRAFTING TABLE 3rd quarter, 20th century; with nickel plated metal base; the top, 32 1/4 x 29 in., adjustable height and slant.
• ANTIQUE INDUSTRIAL DRAFTING TABLE
  ANTIQUE INDUSTRIAL DRAFTING TABLE Circa 1900, mixed woods and iron, rectangular top with pierced bread board ends, black painted wood and metal base, shoe feet, appears unmarked.
• F. WEBER Wood Adjustable Drafting
  F. WEBER Wood Adjustable Drafting Table. Dimensions: H: 53 inches: W: 42 inches: D: 20.5 inches --- Condition: Split on top.
• DIETZGEN Vintage Oak Base
  DIETZGEN Vintage Oak Base Drafting Table. Adjustable Top. Industrial. Label. Dimensions: H: 48.5 inches: W: 48 inches: D: 28.5 inches --- Condition: Expect wear from use.
• GREEN PAINTED DRAFTING TABLEca.
  GREEN PAINTED DRAFTING TABLEca. 1905; purportedly from the Thaddeus Stevens School, Lancaster, PA, with a rectangular top with pencil stop over a sawbuck base and right side opening for storage, 37 1/2"x 25 1/4"x 38 1/2"; Condition: missing right side door on drawers, age and use wear
• Regency Mahogany Adjustable
  Regency Mahogany Adjustable Draftsman's Table British, 19th century, figured mahogany, top with two ratcheted writing boards, column support with crank mechanism to raise and lower top, 29-1/2 x 19-1/2 x 36-1/2 in.,
• Architectural adjustable drawing
  Architectural adjustable drawing table w / adjustable chair, 33"h x 48"w x 38"d
• PINE AND OAK ADJUSTABLE DRAFTING
  PINE AND OAK ADJUSTABLE DRAFTING TABLEPine and oak adjustable drafting table, late 19th c., 30 1/2" h., 50" w. Condition: Good condition. No apparent damages or repairs.
• LEONAR Neolt Italy drafting table
  LEONAR Neolt Italy drafting table with foot lever adjustment. Dimensions: H: 40 inches: W: 59 inches: D: 39.5 inches --- Condition: Some pitting and scuffs to chrome. White table top clean. Tilting mechanism locks in place as it should.
• BAKER STATELY HOMES MAHOGANY
  BAKER STATELY HOMES MAHOGANY DRAFTING TABLE Baker Furniture Stately Homes Collection mahogany architect's drafting table a la Tronchin in the Chinese Chippendale taste, marked to the interior of the drawer Approximate dimensions: flat excluding the rest h. 30", w. 25. 25", d. 19".
• TILT-TOP DRAFTING TABLE WITH IRON
  TILT-TOP DRAFTING TABLE WITH IRON BASE Early 20th c. Adjustable Artist's Table, with oak top and cast-iron tripod base, table top: 25 1/2" x 21 1/2". Good condition.
• 19C WILLARD VICTORIAN OAK
  19C WILLARD VICTORIAN OAK DRAFTING TABLE United States,Late 19th CenturyAdjustable top over a Victorian aesthetic carved base.
• A George III Mahogany Drafting
  A George III Mahogany Drafting Table 18th/Early 19th Century Height 29 x width 23 1/2 x depth 18 3/4 inches.
• THOMAS MOSER STYLE PINE ARCHITECT'S
  THOMAS MOSER STYLE PINE ARCHITECT'S DRAFTING TABLE American, late 20th century. Thomas Moser style pine and mixed wood standing desk with a lifting drafting surface, two filing drawers, and raised on square shaped legs.
• GEORGE III MAHOGANY EXPANDABLE
  GEORGE III MAHOGANY EXPANDABLE ARCHITECT'S DRAFTING TABLE/DESK, WITH TOOLED LEATHERGEORGE III MAHOGANY EXPANDABLE ARCHITECT'S DRAFTING TABLE/DESK, WITH TOOLED LEATHER, late 18th Century, the rectangular hinged drafting top with a bottom and top removable support rail fitted into brass holes, the top adjustable for front and back slanted use, above a long drawer, with an elaborate cast brass handle, expanding on rectangular legs to reveal a black tooled leather writing surface with an adjustable support sliding back to reveal an interior with small drawers and hidden compartments, all resting upon rectangular external legs with internal columnar supports, on casters, expandable depth: 41 in. - h:32w:37d:23in.
• TWO PAUL FRANKL STYLE LAMPS &
  TWO PAUL FRANKL STYLE LAMPS & DRAFTING TABLE Mid-century modern, 3rd quarter 20th century; comprising two floor-lamp tables, one with formica top, both with period fiberglass shades, tallest is approximately 57 in. H.; and a pine adjustable drafting table, 29 1/2 in. H., 36 1/4 in. W., 24 in. D.
• Black painted drafting table with
  Black painted drafting table with faux lift lid. 46.5"h x 47.5"w x 33.5"d Condition: Chips, cracks, wear consistent with age.
• Kittinger Drafting DeskGeorge III
  Kittinger Drafting DeskGeorge III style architect's table mahogany 20th century fine red leather slant front lift lid with pigeon hole compartments over single drawer labeled ''Kittinger Pattern T448-OD/SEMI/FILL'' two brass handles and pull out slides all set on a fluted leg base with stetcher.51 x 36 x 28.5 in.Overall good condition some wear to leather top.