A few examples of appraisal values for
SAMURAI HELMET

• A Japanese Samurai Helmet. Height 7
  A Japanese Samurai Helmet. Height 7 x width 14 x depth 13 1/2 inches.
• Replica of Japanese Samurai helmet,
  Replica of Japanese Samurai helmet, quality replica with leather and brass mounts, very good condition
• LATE EDO JAPANESE SAMURAI HELMET
  LATE EDO JAPANESE SAMURAI HELMET Circa 1840 Samurai Kabuto from set of Tachi Tosei Gusoku Armor, having a Shikoru or neck guard of flexible laced lacquered iron Kozane or neck scales, fabric lined iron dome with bronze and gilt bronze decorations, including a top port for pom, mounted with deer antlers, silk adorned Fukigaeshi or blowbacks and Mabisashi or visor, silk chin cords intact, missing the Daimyo Maedate or badge from the front, probably removed after the fall of the Shogunate in 1876. On a modern black painted museum stand.
• SAMURAI LEATHER HELMET AND
  SAMURAI LEATHER HELMET AND PADSSamurai Leather Helmet and Pads,
• 2PCS JAPANESE SAMURAI HELMET & FACE
  2PCS JAPANESE SAMURAI HELMET & FACE MASK 2PCS Japanese Samurai helmet (Kabuto) and face mask (Mempo), likely Edo period (1603-1868), the Eboshi-nari Kabuto or helmet in the form of a court cap, created in iron with a thick black lacquer finish and blue silk lacing, the high sweeping crown of the helmet leading to the four layer Shikoro (neck protection) at the back and small turn backs at the front; together with a half face mask (Ressei Menpo) with stylized cheekbones, retaining tufts of moustache and beard hair, and suspending a silk laced and decorated Nodowa or throat protector. Approximate dimensions: helmet h. 12.75", w. 11.5", d. 11.25". mask h. 10.25", w. 7", d. 5".
• JAPANESE BRONZE SAMURAI
  JAPANESE BRONZE SAMURAI HELMETCondition: with slight wear to applied finish on bronze; 14 inches wide; 11 inches high Condition:
• SAMURAI ARMOR. Japan 19th
  SAMURAI ARMOR. Japan 19th century. Lacquered metal plate cuirass and helmet. The cuirass has partial tassets with dark blue lacing and hinged shoulder straps. The helmet has a neck guard and red lacquered chin guard. Sleeve armor for both arms and two greaves. The sleeves have blue cloth lacquered metal strips and chain mail the greaves have lacquered metal strips and small metal plates sewn into gold colored cloth. Imperfections. Loss and damage the fabric and lacings are very fragile.
• JAPANESE LACQUER JINGASA SAMURAI
  JAPANESE LACQUER JINGASA SAMURAI HELMETJapanese Edo period shingen style jingasa samurai helmet, likely 18th-19th century. Lacquered wood with a gold overlay mon (crest) in a circular cartouche. The interior with red and gold lacquer with cloth straps. Height: 4 1/2 in x diameter: 13 1/4 in. Condition: The item is in good condition in general with no visible cracks or major losses. Wear throughout. There is a minute dent to the front. Along the exterior and around the edge of the hat, there are several lacquer losses. Heavy wear to the cloth components. No visible sign of restoration under UV light.
• Antique Mid Edo Period Samurai
  Antique Mid Edo Period Samurai lacquered iron helmet Jyurokken Suji Kabuto, distressed condition
• JAPANESE KARATE CHAMPIONSHIP
  JAPANESE KARATE CHAMPIONSHIP SAMURAI HELMET AWARD: Presented to Mr. S. Takashina, for the 14th All South Karate Championship, 1977. Impressed marks at interior of Samurai Kabuto. Approx. 11'' h x 13.75'' l x 8.5'' w. CONDITION: Thinning of rope at tassels.
• A Suit of Samurai Armour (Tetsu
  A Suit of Samurai Armour (Tetsu Kuro Urushi Okegawa Nimai Dou Gusoku), Early Edo Period, 17th Century Brown/black lacquer three-plate iron zunari kabuto (helmet) with matching hanpo (facial armour) and bronze half-moon maedate (frontal decoration), Edo period; large plain do/dou (breastplate/cuirass), Momoyama period; together with armour stand and storage box overall including box and stand height 51.2 in — 130 cm
• An Embroidered Textile Panel of a
  An Embroidered Textile Panel of a Samurai Helmet framed. 13 3/4 x 9 3/4 inches.
• Miniature samurai armor, comprising
  Miniature samurai armor, comprising of kabuto (helmet), mempo (face mask), oyoroi (body armor), boots and shin guards, made of various metals, fabrics, lacquered paper, 20th century, 29 in. on wooden stand, lacking one boot, one shin guard, helmet finial, some pieces of helmet off but present ; with a black lacquered karabitsu (storage box), late 19th/early 20th century, 16 x 25 x 16 in., lacking ring on kiku mount, paint spatter, losses and repaint to surface, legs with chips, losses, one reattached ; and two lacquered metal and wood abumi (stirrups), each with gilt floral mon (crest), late 19th/early 20th century, approximately 11 x 11-1/2 x 5 in., cracks and losses to lacquer, areas of rust . Private Collection, Sarasota, Florida
• CARVED WOOD SCULPTURE OF A
  CARVED WOOD SCULPTURE OF A SAMURAI HELMET WITH DEER ANTLERS Detailed life size carving from heavy hardwood, depicting a 19th c. Samurai helmet or Kabuto, with antlers set loose into a receiver, roughly 26" tall, 18" wide, 11" deep.
• JAPANESE SAMURAI ARMORJapanese
  JAPANESE SAMURAI ARMORJapanese Samurai Armor, c. 1820, incl. two shoulder protectors, two arm protectors, and a torso protector, body l. 37 1/2 in., w. 22 in; arm/hand l. 26 in. Provenance: Property deaccessioned from the Louisiana State Museum, proceeds to be used for new acquisitions or the direct care of existing collections.
• Japanese, probably early 20th
  Japanese, probably early 20th century, miniature model of a seated samurai dressed very elaborately with embroidered robes, detailed armor and helmet seated on wood stand; as-is condition with heavy flaws, threading, damage to embroidery, losses, the crown dented with parts missing; H 19"
• JAPANESE MEISEN KIMONO WOVEN WITH
  JAPANESE MEISEN KIMONO WOVEN WITH KABUTO (SAMURAI HELMET) ON BLACK AND GOLD WIDE STRIPED GROUND, TAISHO PERIOD (CIRCA 1910-20)JAPANESE MEISEN KIMONO WOVEN WITH KABUTO (SAMURAI HELMET) ON BLACK AND GOLD WIDE STRIPED GROUND, TAISHO PERIOD (CIRCA 1910-20),
• A Japanese Mixed Metal Model of a
  A Japanese Mixed Metal Model of a Samurai Warrior on Horseback Meiji Period depicting a samurai warrior clutching the reins wearing armor with gilt highlights the horse in motion their heads turned sideways bearing a three-character mark to the underside of the horse raised on a plinth base and mounted as a lamp with lamp shade. Height to top of figure 16 1/4 inches.
• A Miniature Kabuto (Helmet) and
  A Miniature Kabuto (Helmet) and An Iron Hachiwari (Helmet Breaker) the boy's day helmet with gilt metal horn-shaped kuwagata, the kabutowari with the handle wrapped with red silk cord. Width of helmet 6 3/4 in., 17 cm., length of kabutowari 18 5/8 in., 47.31 cm. Property from the Collection of Kevin Evensen, Chicago, Illinois
• IVORY SAMURAI. Japan 1st
  IVORY SAMURAI. Japan 1st half-20th century. Robed samurai with helmet and swords. Inked details. Signed 10''h. Ivory cannot be shipped outside of the United States.
• JAPANESE SAMURAI PARTIAL SUIT OF
  JAPANESE SAMURAI PARTIAL SUIT OF ARMORJapanese Samurai Black Lacquer and Blue Odashi Partial Suit of Armor , probably Edo Period (1603-1868),incl. menpo or half mask (lacking nose piece) with attached yodare kake (throat guard); do (cuirass) with black lacquered leather kozane scales laced in blue silk odashi, l. 28 in.; haidate (cuisse) with blue damask, painted leather and further kozane, cloth lined, l. 21 1/2 in; and single sode (spaulder), l. 11 in.; together with unrelated metal foot protector, l. 12 in. (5 pcs.) Provenance: Property deaccessioned from the Louisiana State Museum, proceeds to be used for new acquisitions or the direct care of existing collections.
• A Suit of Samurai Armour
  A Suit of Samurai Armour (Yamaichi Tateage Dangae Dou Gusoku), Momoyama to Edo Period (1573-1868) Heavy iron eight-plate suji kabuto (ridged helmet) to withstand bullets, with copper tehen (small opening to the top), disctinctive hanpo (facial armour) and gilt wood dragon maedate (frontal decoration) with inlaid glass eyes, early to mid Edo period; yamaichi tateage dangae do/dou (breastplate/cuirass) embellished with light-coloured stenciled deerskin leather and fitted with pockets, Momoyama period; together with suneate (shin guards), armour stand and storage box overall including box and stand height 55.1 in — 140 cm
• Japanese jingasa, helmet edo
  Japanese jingasa, helmet edo period Of bajo-gasa form, lacquered leather and domed, upturned front edge, surmounted kirigane circle issuing three arrow head arms and foliate medallion to front over a e-nashiji ground, gold flakes to red ground to underside. H: 5 D: 13 in. PROVENANCE: Private Collection
• A Japanese Minature Helmet-Form
  A Japanese Minature Helmet-Form Silver Bonbonnière Meiji/Taisho Period in the form of a sujibachi-kabuto engraved with a crouching dragon crest above the maedate in the form of kuwagata, marked pure silver, Miyamoto ?????. Height 2 1/4 in., 5.7 cm.
• A Bronze Samurai Warrior Figure
  A Bronze Samurai Warrior Figure Japanese patinated bronze okimono cast as a high-ranking samurai warrior with a fierce expression and standing in an alert pose with a long three-prong yari held to the front; he wears a helmet fashioned as a tall eboshi and is clad in armor partially hidden by a brocade patterned jin-baori. Finished in natural bronze black gilt brown face gray base.
• MODEL SAMURAI HELMET ON STAND,
  MODEL SAMURAI HELMET ON STAND, PRESENTED TO GENERAL POWELL BY GENERAL TAIZO TERASHIMA, 1991 8 3/4 X 10 X 6 3/4 IN. (22.23 X 25.40 X 17.15 CM.)MODEL SAMURAI HELMET ON STAND, PRESENTED TO GENERAL POWELL BY GENERAL TAIZO TERASHIMA, 1991, the helmet in white and gold metal, atop purple silk, tied with orange rope with tassel, atop a black base, metal plaque 'Presented to General Colin L. Powell, USA/Chairman, Joint Chiefs of Staff/By Gen. Taizo Terashima, CJSC/11 June 1991' Catalogue note: Taizo Terashima (1933- ) was Chairman Joint Staff Council. Dimensions: 8 3/4 x 10 x 6 3/4 in. (22.23 x 25.40 x 17.15 cm.) Provenance: Estate of General Colin L. Powell, to benefit America's Promise Alliance and the Colin Powell School at City College of New York.
• JAPANESE CARVED IVORY SAMURAI
  JAPANESE CARVED IVORY SAMURAI ARMORER SIGNEDJapanese carved okimono of seated man holding a samurai warrior's helmet, presumed to be the armorer or artisan who made it. Signed on applied red tablet. Fine condition, with no chips or damage. A couple of age fissures, most visible on back. Measures about 3-1/2" high. PLEASE NOTE: This is antique, pre-ban, African elephant ivory. It will not be shipped internationally, nor can it be shipped where prohibited by law.
• JAPANESE SATSUMA SAMURAI FIGURE
  JAPANESE SATSUMA SAMURAI FIGURE Large Meiji Period Porcelain Seated Warrior, dressed in armor with dragon helmet finial, holding a sword and fly whisk, 13" high, 9" x 7".
• Japanese Samurai sword with
  Japanese Samurai sword with dragon decorated tsuka and ebonized wood sheath. 40.5"l.
• Leather sheathed Samurai sword with
  Leather sheathed Samurai sword with a shagreen and leather grip pierced metal tsuba and polished steel blade. 39.5"l.
• JAPANESE SAMURAI SWORD (KATANA)
  JAPANESE SAMURAI SWORD (KATANA) world war two fittings including leather saya cover approximately 28'' slight curve blade wavy temper line with rounded peaks silver family crest on tsuka unsigned tang appears to be late Edo to early Meiji period.
• A Japanese Model of a Samurai the
  A Japanese Model of a Samurai the figure of papier-mache construction with painted features having embroidered silk clothing and shown with a sword at his side seated on a wooden folding chair. Height 16 1/4 inches seated.
• JAPANESE SAMURAI SWORD With lacquer
  JAPANESE SAMURAI SWORD With lacquer scabbard and Shagreen handle.
• JAPANESE SAMURAI GILT METAL
  JAPANESE SAMURAI GILT METAL SCULPTUREGilt metal sculpture depicting a Samurai warrior on horseback. The sculpture is in two-parts. Approx. 13" tall x 14" long x 5 1/2" wide. shipping info This item will need to be shipped by a packing company of your choice. We maintain a list of reliable shippers, or you may choose your own.
• A Vintage Japanese Samurai Sword
  A Vintage Japanese Samurai Sword A vintage Japanese samurai sword, ca. 20th century replica, approx. 44"L with the saba (scabbard), with decorative relief gilt metal fittings, faux shagreen tsuka wrapped in ito (braid), and with the scabbard in black lacquer with gilt metal fittings.
• A Japanese Samurai Sword The
  A Japanese Samurai Sword The replica of an antique sword ca. 20th century with a 33"L saba with crackle lacquer finish and cast gilt brass fittings faux shagreen tsuka (grip) wrapped in ito (braid) overall apprx. 44"L. Not signed. Metal fittings with a prancing horse motif.