A few examples of appraisal values for
TURBINE

• Book - The Evolution Of The Parsons
  Book - The Evolution Of The Parsons Steam Turbineby Alex Richardson
• VERTICAL STEAM ENGINE F.N.N.
  VERTICAL STEAM ENGINE F.N.N. Germany steam turbine brass boiler features curved gear wheel nickel flywheel ready to connect to accessory tin base. 9 1/2'' h. Restored.
• Lionel 671 PA Turbine, also to
  Lionel 671 PA Turbine, also to include Lionel 2037 and Marx 999 engine
• LIONEL PENNSYLVANIA S-2 6-8-6
  LIONEL PENNSYLVANIA S-2 6-8-6 TURBINE .
• MARINE STEAM ENGINE Twin
  MARINE STEAM ENGINE Twin flywheels and cylinders made of heavy machined castings nickeled flywheel and cylinder appointments. 12'' h. x 7 1/2'' w. (Exc. Cond.)
• VERTICLE STEAM ENGINE Doll
  VERTICLE STEAM ENGINE Doll Germany well designed tower model with oscillating cylinder stairs to platform single nickel flywheel boiler with spirit burner tin painted base. 12 1/2'' x 12 1/2''. Some wear to base.
• STEAM ENGINE This is a model
  STEAM ENGINE This is a model loosely based on Richard Trevithick's design unusual flywheel support curved stack opening burner door without burner pot nickeled flywheel his locomotive design was once used as a circus attraction. 12'' x 16''. Restored some new parts.
• VACUUM ROTOR ENGINE Made by Rotor
  VACUUM ROTOR ENGINE Made by Rotor Corporation of America heavy casting early example spirit burner fixed to base oscillating cylinder and flywheel whistle at top. 9'' l. Some Restoration. (Good Cond)
• ERNST PLANK STEAM ENGINE Germany
  ERNST PLANK STEAM ENGINE Germany smaller scale single feed line flywheel and oscillating cylinder mounted on tin base boiler house shows burning whistle at top tall stack. 11'' h. Some scoring to boiler area.
• Original Cut-Away Illustration of
  Original Cut-Away Illustration of Gas Powered Turbine Engine Car invention. Used in 1948 London Illustrated News. Original work measures 16.75 x 7.75. Important illustration of first experimental and demonstrated gas turbine car to dramatically improve fuel efficiency which was subsequently, followed by Chrysler Original Illustration of Gas Powered Turbine Engine Car. Used in 1948 London News. Original work measures 16.75 x 7.75 Dimensions: H: 14.5 inches: W: 10 inches --- Condition: Very Good Condition.
• A GROUP OF WOOD FORMS FOR HYDRAULIC
  A GROUP OF WOOD FORMS FOR HYDRAULIC TURBINE GEARSA group of wood forms for hydraulic turbine gears, Circa 1930s Each marked with various letters and numbers, possibly parts numbers; four with paper labels to verso describing shape and designated use The wood forms comprising two bevel mortise gears, one pinion gear, one spur gear, and two undesignated gears, 6 pieces Dimensions: Largest: 31.5" Dia. x 7.25" D; smallest: 15.5" Dia. x 6" D Provenance: Estate of Dr. Sanford Kaufman and Dr. P. Waverly Davidson
• BRASS CHESAPEAKE & OHIO M-1 TURBINE
  BRASS CHESAPEAKE & OHIO M-1 TURBINE ENGINE & TENDER: Brass Chesapeake & Ohio M-1 Turbine 2-D-2+2-D-2 model train Engine & Tender, by Custom Brass/Orion ST-12x, 1982. In original box. Approx. 2.75'' h x 17.75'' l x 8.25'' w. CONDITION: Wear consistent with age and use.
• VERTICAL STEAM ENGINE Mounted on
  VERTICAL STEAM ENGINE Mounted on ornate circular base polished boiler includes flywheel single oscillating cylinder sight glass and whistle and spirit burner. 12'' h. (VG Cond)
• WIND-UP MILL TYPE ENGINE Ernst
  WIND-UP MILL TYPE ENGINE Ernst Plank Germany hand painted tin tandem compound engine large flywheel painted in red mounted on wooden base originally sold by Sears Roebuck Co. 19'' w. (VG Cond.)
• CARETTE STEAM ENGINE Germany
  CARETTE STEAM ENGINE Germany interesting design rectangular fire box and boiler activates twin cylinders by flywheel on raised platform litho tin base. 13'' l. x 11'' h. (Good Cond)
• VERTICAL STEAM ENGINE Germany
  VERTICAL STEAM ENGINE Germany nickel flywheel oscillating cylinder whistle feed line regulator all nickel cast iron base. 11'' h. Replaced sight glass hardware.
• WEEDEN NO. 34 OVERTYPE STEAM ENGINE
  WEEDEN NO. 34 OVERTYPE STEAM ENGINE Cast iron flywheel vent star on side burnished boiler single cylinder. 9 1/2'' x 10''. Missing sight glass (VG Cond.)
• LARGE VERTICAL STEAM ENGINE
  LARGE VERTICAL STEAM ENGINE Schoenner intricate design tall example with flywheel flyball govenor whistle and small simulated water feed pump mounted on cast iron base burner intact. 16 1/2'' h. (VG Cond)
• TWIN PISTON BEAM STEAM ENGINE
  TWIN PISTON BEAM STEAM ENGINE Builder's model features center mounted triangular support for beam has cylinder valve chest on one side rod connects to crankshaft on other for eccentric large serpentine flywheel cast base and flywheel appears machined; can work on steam or compressed air. 29'' w. (VG Cond.)
• VERTICAL STEAM ENGINE Burnished
  VERTICAL STEAM ENGINE Burnished boiler single flywheel oscillating cylinder nickel feed line and whistle wood platform. 12 1/2'' l. Convertible missing wheels to convert (Good Cond.)
• EARLY ANTIQUE INDUSTRIAL STEAM
  EARLY ANTIQUE INDUSTRIAL STEAM POWERED ENGINE ,Early 20th CenturyLarge black flywheel engine with red detailing with light oxidation and scratching throughout.
• Twin-engine pusher transport
  Twin-engine pusher transport plane model, all mahogany, wind-tunnel testing indicated, high tapered wing design similar to a DC-3, two air-cooled inverted six-cylinder engines in nacelles below the wing, landing gear attached to nacelles, conventional empennage, no propellers mounted but spinners present, side-by-side pilotcopilot seating, rectangular piece of wood removable near base of tail possibly to mount a retractable tail wheel, French, 1935-1950, fuselage length 30-12 in., wing width 44-12 in.
• TORO ELECTRIC BLOWERToro Electric
  TORO ELECTRIC BLOWERToro Electric Blower
• Delta Pusher wind-tunnel aircraft
  Delta Pusher wind-tunnel aircraft model, glued layers of mahogany carved to form a delta wing boom-tail design with aluminum mock three-cylinder pusher engine without propeller, unusual arrangement of elevator between booms and carrying the rudder, single pilot, screw holes and pad marks indicate wind-tunnel tested, French, 1935-1945, fuselage length 29 in., wing width 31-14 in.
• SIPP STEAM ENGINE Heavily cast
  SIPP STEAM ENGINE Heavily cast example single oscillating cylinder large cast flywheel painted in green and red brass plate over cylinder. 22'' l. (VG Cond)
• A PETROL TURF CUTTER with twin
  A PETROL TURF CUTTER with twin handles
• TOY STEAM ENGINE. Overtype flywheel
  TOY STEAM ENGINE. Overtype flywheel steam engine with horizontal boiler and paint decoration. 5 1/2'' h.
• a/ KRAUSS & MOHR WINDMILL AND
  a/ KRAUSS & MOHR WINDMILL AND PUMP Germany c. 1905 steam toy features woman at water pump with animal figures at side windmill has stairs leading to platform lot includes mill with trip hammers. 3/5 Box pictured belongs to lot 1155. Some paint wear and flaking.
• STEAM ENGINE Germany brass
  STEAM ENGINE Germany brass horizontal boiler and feed line cast flywheel oscillating reverse and forward cylinder pressed steel base spirit burner included. 15'' h. x 13 1/2'' w. Missing paint on base tall embossed stack repainted.
• WILESCO ELECTRIC STEAM ENGINE POWER
  WILESCO ELECTRIC STEAM ENGINE POWER PLANT Germany,20th CenturyHorizontal type double fly wheel engine mounted to a metal plinth, showing signs of oxidation throughout and paint loss, missing cord.
• A standing engine
  A standing engine
• LOT OF TWO ENGINES Early grouping
  LOT OF TWO ENGINES Early grouping includes vertical boiler model with single oscillating cylinders and electric powered spoke flywheel on cast iron base example. 7'' - 9 1/2'' l. Missing spirit burner (Good Cond.)
• Toro Ultra Electric Blower
  Toro Ultra Electric Blower
• Twin-turret fighter bomber model,
  Twin-turret fighter bomber model, mahogany fuselage, sesquiplane wings, tail, and landing gear, two metal propellers, wind-tunnel testing indicated, finely detailed construction with dual open cockpit and small overwing to smooth airflow, twin turrets with four machine guns per turret, twin water-cooled V-12 engines mounted on lower wing with barrel radiators mounted under front engine nacelles, wind-turned generators and cockpit venturi, French, 1920-1935, fuselage length 14-14 in., wing width 24-12 in.
• TWO WILESCO STEAM ENGINES West
  TWO WILESCO STEAM ENGINES West Germany extensive appointments horizontal boilers mounted on brickwork supports each with nickel flywheel ladders to catwalks and all necessary gauges smoke stacks are embossed one includes electric power cord. 13'' h. x 13'' w. One overflow cap missing (Good Cond.)
• Motive power apparatus. A steam
  Motive power apparatus. A steam flow meter, Curnon Engineering Co, c1930, in black painted cast iron housing with glass front enclosing brass mechanism with brass lever valves and fittings, 21cm h excluding valves